Installing An Ethernet Cable - Huawei DBS3900 Installation Manual

DBS3900 LampSite
Installation Guide
Figure 9-21 Opening the cover plate of the pRRU cabling cavity
(1) Cover plate
(4) Cable clip for Ethernet cables (5) Cable trough for Ethernet cables (6) Cable trough for Ethernet cables
(7) Waterproof block
Step 3 Remove the waterproof block.
----End

9.4.8 Installing an Ethernet Cable

This section describes how to install an Ethernet cable.
Context
l
l
l
Issue 06 (2015-10-30)
NOTE
Remove only the waterproof blocks for cables to be installed.
The Ethernet cable must be of Category 5e (enhanced) or higher.
With the internal PoE module providing power, the maximum length of an Ethernet
cable is 100 m. With the Extender, the distance of the pRRU3907 and RHUB can be
extended by the Extender up to a total distance of 200 m.
Ethernet cables are not delivered, and they must be prepared onsite. You need to use a
network cable tester to test the Ethernet cable connection.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) Cabling cavity
-
9 Installing a pRRU3907
(3) Cable clip for Ethernet cables
-
158