DBS3900 LampSite
Installation Guide
Figure 9-16 Installing a pRRU PGND cable
Crimp OT terminals in correct directions, as shown in
Figure 9-17 Correct direction for crimping an OT terminal
Step 3 Label the installed cable by following the instructions in Attaching a Sign Plate Label.
----End
9.4.6 Installing an RF Jumper
This section describes the procedure for installing an RF jumper.
Issue 06 (2015-10-30)
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
9-17.
9 Installing a pRRU3907
153