Huawei DBS3900 Installation Manual page 105

DBS3900 LampSite
Installation Guide
Figure 8-6 Anchor points on the pRRU3902 mounting bracket
(1) Wall
To prevent inhalation or eye contact with dust, take adequate preventive measures when
drilling holes.
Step 3 Use a hammer drill with φ6 bore to drill holes at the marked anchor points, as shown in
Figure
the distance between them. If they are inaccurately positioned, re-measure and re-drill the
holes. Then, use a rubber mallet to hit a plastic expansion sleeve into each hole.
Issue 06 (2015-10-30)
(2) Mounting bracket
CAUTION
8-7. Use a vacuum cleaner to clean the dust inside and around the holes and measure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing a pRRU3902
(3) Anchor point
99