DBS3900 LampSite
Installation Guide
Figure 8-2 pRRU3902 installation process
8.3 Installing a pRRU3902
This section describes the pRRU3902 installation process. A pRRU3902 can be installed on a
wall, ceiling, indoor metal pole, or keel, but not on an aluminum panel or a non-standard keel.
NOTE
Note the following when installing the pRRU3902:
l The pRRU3902 cannot be grounded. If the pRRU3902 is grounded but the RHUB connected to this
l A minimum distance of 50 cm must be reserved between the pRRU3902 and the incandescent lamp.
l The installation spacing between the pRRU3902 and the temperature sensor must be greater than 50
l It is good practice to install the pRRU3902 on materials that can tolerate a temperature higher than
8.3.1 pRRU3902 Mounting Kits
This section describes the pRRU3902 mounting kits.
Issue 06 (2015-10-30)
pRRU3902 is not, the pRRU3902 may fail to be powered on.
cm.
65°C and have an ignition point higher than 70°C.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Installing a pRRU3902
96