Network Selection And Busy Lamp Field Indication Across The Network - Samsung Officeserv 7100 Technical Manual

OfficeServ 7100
TECHNICAL MANUAL
Notes:
Directed call pickups, hold pickups, and park pickups are all supported over the
•
network.
This feature is supported over Q-sig and IP networking.
•
When CID in present, the CID information is passed across the network.
•
MMC INFORMATION:
MMC 722 (set DIRPK, HPK, and PAGPK keys)
MMC 724 (set directed pickup, hold pickup, and page/park pickup access codes)
NETWORK SELECTION AND BUSY LAMP FIELD INDICATION
ACROSS THE NETWORK
Programmable keys can be assigned as NS/BLF keys that will function across the
network. A station with NS/BLF keys in can programmed with station numbers from
other nodes within the network. The NS/BLF keys will provide a visual status indication
to the associated station. The NS/BLF key will be off when that associated station is idle,
will light red when the station is in use, and will flash when the station is in DND. The
station user can press a programmed Network Selection key to call or transfer to a
station user in other nodes in the network. The steps for accessing an NS/BLF key are:
NSS/BLF NS key: Press the selected NS(XXXX) key = Place call to selected station
across the network.
XXXX = (3 or 4 digit network station number)
Notes:
NS/BLF keys can be programmed on any keyset or add-on module.
•
This feature is not supported over PRI Q-sig. This feature requires a LAN connection.
•
Network stations are supported on NS keys, but virtuals and station group numbers
•
cannot be associated with NS Keys.
Any keyset user can have multiple NS keys with different extenders.
•
The NSS keys can be used to answer ringing calls from the associated station.
•
A visual indication is provided when the associated station is ringing, but no audible
•
indication is presented.
The network selection keys can be used for directed call pickup across the network
•
if this feature option is activated in MMC 210, DSS KEY DPU set to ON in the NODE
where that ringing station is physically connected.
MMC INFORMATION:
MMC 722/723 ( set NS key to keysets)
•
MMC 210 (DSS KEY DPU)
•
2.9.10
Table of Contents
Home Page
PROGRAMMING
PART 2 JANUARY 2009