Samsung Officeserv 7100 Technical Manual page 45

OfficeServ 7100
TECHNICAL MANUAL
If the networked systems are to use a centralized voicemail system then the
switch that has the VMAA will have all the MB entry = Y, all others will be = N.
In our example switch 001 will host the centralized voice mail so the MMC 824
entries for switch 001 will now look like this:
→
[01:22
[SZ:2 MAX:07 MB:Y]
→
[02:23
[SZ:2 MAX:07 MB:Y]
And so on for all four entries.
The trunk side of the network intercom dial plan must now be set up to allow LCR to
send intercom calls across to the other switch.
6. Put the trunks for each network link into their own trunk group.
e.g. in switch 001 put the trunks to switch 002 in group 802 and the trunks to
switch 003 in 803.
7. Using MMC 821 change each network link from "Normal" to "Q-SIG".
8. Set up LCR routes in MMC 712 to allow LCR to access the network links.
e.g. for switch 001 the route could be route 2 to access switch 002 set up as
02:1 C:1 G:802 M:_ _ _
Route 3 to access switch 003 set up as 03:1 C:1 G:803 M:_ _ _
9. Set up the LCR digit tables in MMC 710 to allow access to the network link routes.
e.g. for switch 001 the entries would be:
Digits Length
002
003
In order to receive incoming calls over the network the DID table must be set up.
10. Make entries in the DID digit table MMC 714 for the digits to be received over the
network links.
e.g. for switch 001:
00222]
00323]
Route
7 2
7 3
2.7.3
Table of Contents
Home Page
SPECIAL APPLICATIONS
PART 2 APRIL 2007