Samsung Officeserv 7100 Technical Manual page 4

OfficeServ 7100
TECHNICAL MANUAL
2.2 CALLER ID
The OfficeServ 7100 is compatible with both types of Caller ID as defined by
BELLCORE. These are the single message format or "Number Only" sometimes
referred to as standard Caller ID and the multiple message format or "Name and
Number" sometimes referred to as Deluxe Caller ID. In the case of Number Only
delivery, there is a translation table available that may be used to add names to the
delivered number.
HARDWARE PROVISIONS
A 4TRM trunk module
SOFTWARE PROVISIONS
The MMCs related to Caller ID are listed below with a short description of their use.
They are listed in the recommended order in which they should be programmed. This
sequence is suggested so that the installer gets a better understanding of how the
feature works. There is no technical reason to follow this sequence.
MMC 414 CALLER ID TRUNKS
MMC 312 ALLOW CALLER ID
MMCs 722 and 723
MMC 728 CID TRANSLATION
MMC 725 SMDR OPTIONS
MMC 119 CALLER ID DISPLAY
This MMC is used by the technician to determine
which trunks will receive Caller ID data.
This MMC is used by the technician to determine
which keysets are allowed to receive Caller ID
displays.
These MMCs have keys related to Caller ID
features added to
recommended that all keysets allowed Caller ID in
MMC 312 are programmed with a CID key.
This MMC allows the technician to create a list of
names that correspond to numbers received from
the Central Office. These names will be displayed
when a call rings in that has NUMBER ONLY data
provided by the CO.
The ability to print Caller ID data and abandoned
calls is determined by this MMC.
The OfficeServ 7100 will display both Caller ID
Name and Number simultaneously on the display
the keysets. This MMC is used by the end user to
2.2.1
Table of Contents
Home Page
SPECIAL APPLICATIONS
PART 2 APRIL 2007
them. It is strongly