Samsung Officeserv 7100 Technical Manual page 66

OfficeServ 7100
TECHNICAL MANUAL
• MB:N: When using Centralized Voice Mail using SVMi-4E/8E/16E cards, other
systems need to manually create mail boxes for each system. If this option is "Y",
the system creates up to 100 mail boxes for the phone numbers which starts
with the numbers assigned in MMC 724, with a length specified by the value of
"SZ". That is, it makes 100 mail boxes of 2200~2299 automatically.
Combine the switch ID and the LCR code to create the entries for MMC 824.
e.g. for switch 001 those would be:
Since we are using 4 digit extension and group numbers, the size field for each
entry will be 4.
Since we are using 3 digit switch IDs and 4 digit extensions and group numbers,
the max digits field for all entries will be 3 + 4 = 7.
If the networked systems are to use a centralized voicemail system then the
switch that has the VMAA will have all the MB entry = Y, all others will be = N.
In our example switch 001 will host the centralized voice mail so the MMC 824
entries for switch 001 will now look like this:
[01:22 → 00222]
[SZ:2 MAX:07 MB:Y]
[02:23 → 00323]
[SZ:2 MAX:07 MB:Y]
And so on for all four entries.
The trunk side of the network intercom dial plan must now be set up to allow
LCR to send intercom calls across to the other switch.
6. MMC 210: Tenant On and Off: LCR ENABLE: Set to ON to enable Least Cost
Routing.
7. MMC 310: LCR CLASS: Assigns the LCR class. If there is only one path connected
to another system, it is set to 1(default).
8. MMC 603: TRUNK GROUPS: For VoIP networking, all VoIP signaling trunks are
assigned to one group. VoIP signaling trunks are the virtual trunks specified in
"VOIP NET NUM PLAN" in MMC 724.
XXXYY
00222
00251
00323
00352
2.8.5
Home Page
SPECIAL APPLICATIONS
PART 2 JANUARY 2009
Where
XXX = Switch ID
Y = LCR Access Code
Table of Contents