Mgi Services - Samsung Officeserv 7100 Technical Manual

OfficeServ 7100
TECHNICAL MANUAL
same IP address and LAN connection since the MP10/MP10a also performs the MGI
function.
Unique programming allows the access to the private Intranet and Public Internet
services simultaneously. This is accomplished via programming static IP addresses for
specific uses.
The MGI use is distributed via channels. Port reference is used to accommodate a
more static perception of the MGI channel identity. For simplicity the word port will be
used to reference MGI card channels.
The MGI can be used for several functions simultaneously or individually. Each MGI
port will auto negotiate the service of each port for the type of usage required. This
means that the same port can use SIP trunking for one call and H.323 for the next call
without any programming changes. With multiple MGI cards installed, service grading
of the MGI can be programmed so that specific MGI channels can be selected for
different uses. This grading is similar to standard trunk grading where the number of
users do not match the number of available lines. If a one to one ratio is required for
total non-blocking service this can be accomplished via programming and selection of
the number of simultaneous uses in proportion to the number of MGI ports.
MGI card(s) use of services can also be shared. MMC 615: MGI Group, allows the
segregation of services to specific cards. MMC 724: Dial Numbering Plan, allows
addressing of the default numbers and trunk assignments to customize the application.
MMC 831: MGI Parameters provides the MGI card(s) with IP address information.
MGI Services will be explained in detail in the MGI Functional Overview section found
later on in this Application Section.

MGI Services:

H.323 Trunking Gateway
-
SIP Trunking Gateway
-
ITP keyphone CODEC support
-
VoIP Networking (SPNet)
-
MP10/MP10a
The MP10/MP10a provides a robust IP platform on the OfficeServ 7100. The
MP10/MP10a supports the default LAN connection via the RJ 45 10/100 BaseT port on
the face of the card. This connects to the same IP network that the MGI card(s) are
connected to. (ITP keyphones can be on the same or a different network). The
OfficeServ 7100 system IP address is registered on the MP10/MP10a card. All IP
connectivity is directed to the MP10/MP10a IP address. MMC 830: Ethernet
Parameters, provides the selections for the system MP10/MP10a IP address.
Home Page
2.6.6
Table of Contents
SPECIAL APPLICATIONS
PART 2 JANUARY 2009
The