Attaching The Pcb-50Xray - Canon CXDI-50G Service Manual

Attaching the PCB-50XRAY

1.8
1. Remove the connector of each cable.
(1) Sensor cable (J002/CN2)
(2) X-ray I/F cable (J004)
(3) Remote switch cable (CN4)
(4) PCB-50XRAY board/50 Power supply (J001/CN3)
2. Loosen the screw fixes the PCB-50XRAY and remove it.
Note:
1. The power supply cable must be removed before assembling.
4. Repair Guide
8