Removing The Cover - Canon CXDI-50G Service Manual

4. Repair Guide

Removing the cover

1.3
Screw M3x12 (x15)
Screw M3x8 (x15)
Sleeve cover (x11)
Insulation sleeve (x11)
Sleeve cover (x11)
Base cover
Insulation sleeve (x11)
Screw M3x8 (x11)
1. Remove the sleeve cover (x11).
2. Remove the screw (M3x8) or screw (M3x12).
3. Remove the insulation sleeve and base cover.
Note:
1. Handle with carefully so that the defect should not adhere.
2. The insulation sleeve and sleeve cover must not be lost.
3. The order of detaching the screws fixes the base cover is not asked especially. At assembling,
check the screw length, tight the screws evenly and be careful not to tighten it so much.
3