Canon CXDI-50G Service Manual page 173

Error Code Reply
Seriousness Keys
-504 RETRY
Warning CANCEL
-505 RETRY
Warning CANCEL
-507 RETRY
Warning CANCEL
Error Code List for Version 6.00
[Operation after Reply Key is touched]
#1:Warning
#2:DICOM Parameter Error
#3:DICOM transfer Parameter is wrong.
[Cause]
DICOM transfer parameters are not correct.
[Operation after Reply Key is touched]
When RETRY is chosen, the image will be transferred again.
When CANCEL is chosen, transfer will be canceled after
displaying a confirmation message. Enter the correct
parameters and transfer the image from the study list again.
#1:Warning
#2:DICOM Response Error
#3:Receiving device reported an error in DICOM response.
Check receiving device.
[Cause]
DICOM response was received properly. However, the target
reported an error as a response.
[Operation after Reply Key is touched]
When RETRY is chosen, the image will be transferred again.
When CANCEL is chosen, transfer will be canceled after
displaying a confirmation message. Re-transfer is possible by
sending an image from the study list.
#1:Warning
#2:DICOM Printer Status Error
#3:CXDI has aborted DICOM transmission because of a
FAILURE in DICOM printer status. Check receiving device.
[Cause]
DICOM printer status was received properly. However, the
target reported a FAILURE as printer status, and so the image
transfer was cancelled.
[Operation after Reply Key is touched]
When RETRY is chosen, the image will be transferred again.
When CANCEL is chosen, the transfer will be cancelled after
displaying a confirmation message. Re-transfer is possible by
sending the image from the study list.
- 18 -
ror Code List for Versi
Message
[Cause]