Table of Contents
Advertisement
-V filename
This parameter dumps the
transfer log.
-I
A-RELEASE-RES is
ignored.
-jn
This is the time to take
timeout.
Note
The parameters -p, -v, and -V filename display the log on the console. Therefore, be sure
to always erase these parameters before operation by the user.
2. Installation Manual
* Both the -p and -v
parameters should be used.
These settings override the -
s parameter.
* The parameter is used for
analysis after the transfer
software saves the
debugging character string
displayed on the console to a
file with a designated
filename.
It is used only when
problems occur.
* This parameter is used
simply as "-I"
* Sets the time to take timeout
in seconds.
- 54 -
* This parameter does not affect DICOM
data transfer.
* This is used when the error message
[30012 Peer aborted Association (or
never connected)]occurs even though the
DICOM data transfer was successful.
This is used based on the connected
printers.
* This parameter is to be changed when
taking timeout.
Hide quick links:
Advertisement
Table of Contents
