Table of Contents
Advertisement
4-2) Storage settings
A) Open the output destination setting dialog from the user menu.
System
SETUP MENU
* Up to four storage units (2 of which can be used for output at the same
time) can be set.
B) Press the "Storage1" button, and input the following items based on the pre-
installation investigation details.
a. Storage host name (IP address) b. Port number c. Transmission destination
title
C. Press the "SET" button, and input the parameters.
(Normally, the parameters need not be set. They must be input only when the
need arises.)
* A space delimiter must be input between each of the parameters.
2. Installation Manual
DESTINATION
a
b
c
[Fig 4]
[Fig 5]
- 45 -
STORAGE
Hide quick links:
Advertisement
Table of Contents
