Parameter Window Status - Central - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2.3.1

Parameter window Status - Central

In this parameter window, the status reaction of the output is parameterized. The status reaction of the
individual lighting group can be set accordingly in the respective group under the
Status, page 77.
Status response of switching state
of the DALI output
Options:

No: The status of the switch status of a DALI device is not actively sent on the KNX.

Yes: via object "Switch/Status": The common communication object Switch/Status receives the switch
telegram, and the current status becomes active and is sent on the KNX.

Yes: via separate object "Status switch": An additional Status switch communication object is enabled.
Using it, a 1 bit telegram with the actual switch status is sent on the KNX.
Note
This status message relates to all lighting groups of the DALI output.
With a change of the parameterization or after a subsequent switching of the status object, the
assignment of the group addresses already allocated to the communication object Switch is lost and
needs to be reprogrammed.
If the communication object Switch/Status is used for switching and status feedback, particular care
must be taken with the send properties of the communication objects.
No
Yes: via object "Switch/Status"
Yes: via separate object "Status Switch"
Parameter window - Gx
DLR/S 8.16.1M | 2CDC 507 100 D0202 61