Parameter - ABB i-bus KNX Product Manual


ABB i-bus KNX
Commissioning
3.2

Parameter

This chapter describes the parameters of the DALI Light Controller DLR/S 8.16.1M using the parameter
window. The parameter windows have a dynamic structure, so that further parameters or whole parameter
windows may be enabled depending on the parameterization and the function of the lighting groups.
In the following description, the lighting group X or Gx (abbreviated form) represents any one of the
16 lighting groups of a DLR/S.
Note
The additional Light controller function is only available for lighting groups 1...8. With the description of
the DLR/S with its properties and parameters, the explanations and the notation Lighting group x always
only refer to one of the first 8 lighting groups of the DLR/S.
The default values of the parameters are underlined, e.g.:
Option:
Indented parameter descriptions indicate that this parameter is only visible when the main parameter is
parameterized accordingly.
The illustrations of the parameter windows in this manual correspond to the ETS4 parameter windows.
The application is optimized for the ETS3. Parameterization with the ETS2 is not possible. If the ETS
version is higher than ETS3, the representation may deviate slightly.
Note
If, in the following section, the communication objects Switch or Brightness value are mentioned, they
also apply for the communication objects Switch/Status or Brightness value/Status.
42 2CDC 507 100 D0202 | DLR/S 8.16.1M
Yes
No