ABB i-bus
KNX
Commissioning
3.1.2.2
Functional overview
At the top left, you will see the Source channel selection window for marking the source channel. Beside
this is the selection window for the target channel or channels for marking the target channel or channels.
Source channel
The source channel selection defines which parameter settings should be copied or exchanged. Only one
source channel can be selected at a time.
Destination channels
With the selection of the destination channel/channels, you define which channel/channels are to assume
the parameter settings of the source channel.
For the Exchange function, only one destination DALI output can be selected at a time.
For the Copy function, various destination channels can be selected simultaneously. To do this, press
the Ctrl key and mark the required channels, e.g. channel G1 group and G5 group, with the mouse
pointer.
With this button, you select all available destination channels, e.g. A...H.
Reset the selection of the destination channel with this button.
DLR/S 8.16.1M | 2CDC 507 100 D0202 39