Air Baffle Replacement - Lenovo thinksystem SR630 Maintenance Manual

Figure 27. Top cover installation
Note: Before you slide the top cover forward, ensure that all the tabs on the top cover engage the chassis
correctly. If the tabs do not engage the chassis correctly, it will be very difficult to remove the top cover later.
Step 1. Ensure that the cover latch is in the open position. Lower the top cover onto the chassis until both
sides of the top cover engage with the guides on both sides of the chassis.
Step 2. Pivot the cover latch and slide the top cover to the front of the chassis at the same time until the top
cover snaps into position. Ensure that the cover latch is completely closed.
Step 3. Use a screwdriver to turn the cover lock to the locked position.
After installing the top cover, complete the parts replacement. See "Complete the parts replacement" on
page 141.

Air baffle replacement

Use this information to remove and install the air baffle.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
44
ThinkSystem SR630 Maintenance Manual