Front I/O Assembly Replacement - Lenovo thinksystem SR630 Maintenance Manual

Figure 106. RAID super capacitor module holder installation
Step 3. Open the retention clip on the holder, put the RAID super capacitor module into the holder and
press it down to secure it into the holder.
Figure 107. Installation of the RAID super capacitor module on the chassis
After installing the RAID super capacitor module:
1. Connect the RAID super capacitor module to a RAID adapter with the extension cable that comes with
the RAID super capacitor module.
2. Complete the parts replacement. See "Complete the parts replacement" on page 141.

Front I/O assembly replacement

Use this information to remove and install the front I/O assembly.
.
Chapter 3 Hardware replacement procedures
111