Remove The Raid Super Capacitor Module On The Chassis - Lenovo thinksystem SR630 Maintenance Manual

Figure 101. Installation of a RAID super capacitor module on the bottom of the air baffle
Step 1. Insert the RAID super capacitor module into the slot at the bottom of the air baffle as shown.
Step 2. Gently press the tab on the air baffle as shown.
Step 3. Press down the RAID super capacitor module to install it into the slot.
After installing the RAID super capacitor module:
1. Connect the RAID super capacitor module to a RAID adapter with the extension cable that comes with
the RAID super capacitor module.
2. Complete the parts replacement. See "Complete the parts replacement" on page 141.

Remove the RAID super capacitor module on the chassis

Use this information to remove the RAID super capacitor module on the chassis.
Before removing the RAID super capacitor module on the chassis:
1. Remove the top cover. See "Remove the top cover" on page 42.
2. Disconnect the cable of the RAID super capacitor module.
To remove the RAID super capacitor module on the chassis, complete the following steps:
Watch the procedure. A video of the removal process is available:
• Youtube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-C_GGjNudxYy8-c69INMcmE
• Youku:
http://list.youku.com/albumlist/show/id_50462008
.
Chapter 3 Hardware replacement procedures
107