Setting Local User Password Control Parameters - HP 10500 Series Configuration Manual

Step
3. Configure the password
aging time for the user group.
4. Configure the minimum
password length for the user
group.
5. Configure the password
composition policy for the
user group.

Setting local user password control parameters

Step
1. Enter system view.
2. Create a local user and enter
local user view.
3. Configure the password
aging time for the local user.
4. Configure the minimum
password length for the local
user.
5. Configure the password
composition policy for the
local user.
Command
password-control aging aging-time
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
Command
system-view
local-user user-name
password-control aging aging-time
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
290
Remarks
Optional.
By default, the aging time of the
user group is the same as the
global password aging time.
Optional.
By default, the minimum password
length of the user group is the same
as the global minimum password
length.
Optional.
By default, the password
composition policy of the user
group is the same as the global
password composition policy.
Remarks
N/A
N/A
Optional.
By default, the setting equals that
for the user group to which the
local user belongs. If no aging time
is configured for the user group,
the global setting applies to the
local user.
Optional.
By default, the setting equals that
for the user group to which the
local user belongs. If no minimum
password length is configured for
the user group, the global setting
applies to the local user.
Optional.
By default, the settings equal those
for the user group to which the
local user belongs. If no password
composition policy is configured
for the user group, the global
settings apply to the local user.