Establishing A Connection To An Stelnet Server - HP 10500 Series Configuration Manual

Enabling first-time authentication
Step
1. Enter system view.
2. Enable first-time
authentication.
Disabling first-time authentication
Step
1. Enter system view.
2. Disable first-time
authentication.
3. Configure the server host
public key.
4. Specify the host public key
name of the server.

Establishing a connection to an Stelnet server

You can start the Stelnet client to establish a connection to an Stelnet server, and specify the public key
algorithm, the preferred encryption algorithm, the preferred HMAC algorithm, and the preferred key
exchange algorithm.
To establish a connection to an Stelnet server:
Command
system-view
ssh client first-time enable
Command
system-view
undo ssh client first-time
See "Configuring a client's host
public key"
ssh client authentication server
server assign publickey keyname
210
Remarks
N/A
Optional.
Enabled by default.
Remarks
N/A
Enabled by default.
The method for configuring the
server host public key on the client
is similar to that for configuring
client public key on the server.
N/A