Specifying A Source Ip Address For Outgoing Portal Packets; Specifying An Auto Redirection Url For Authenticated Portal Users - HP 10500 Series Configuration Manual

Security configuration guide
Hide thumbs Also See for 10500 Series:
Table of Contents

Advertisement

To configure a NAS ID profile on an interface:
Step
1.
Enter system view.
2.
Create a NAS ID profile and
enter NAS ID profile view.
3.
Bind a NAS ID with a VLAN.
4.
Return to system view.
5.
Enter interface view.
6.
Specify a NAS ID profile for
the interface.
Specifying a source IP address for outgoing portal
packets
After you specify a source IP address for outgoing portal packets on an interface, the IP address is used
as the source IP address of packets that the access device sends to the portal server and the destination
IP address of packets that the portal server sends to the access device.
To specify a source IP address for outgoing portal packets:
Step
1.
Enter system view.
2.
Enter interface
view.
3.
Specify a source IP
address for
outgoing portal
packets.
Specifying an auto redirection URL for
authenticated portal users
If you specify an auto redirection URL on the access device, after an unauthenticated user passes portal
authentication through the portal authentication page, the access device redirects the user to the URL.
To specify an auto redirection URL for authenticated portal users:
Command
system-view
aaa nas-id profile profile-name
nas-id nas-identifier bind vlan
vlan-id
quit
interface interface-type
interface-number
portal nas-id-profile profile-name
Command
system-view
interface interface-type
interface-number
portal nas-ip { ipv4-address |
ipv6 ipv6-address }
138
Remarks
N/A
For more information about the
command, see Security Command
Reference.
For more information about the
command, see Security Command
Reference.
N/A
N/A
By default, an interface is specified
with no NAS ID profile.
Remarks
N/A
N/A
Optional.
By default, no source IP address is specified and
the IP address of the user logon interface is used as
the source IP address of outgoing portal packets.
In NAT environments, HP recommends that you
specify the interface's public IP address as the
source IP address of outgoing portal packets.

Advertisement

Table of Contents
loading

Table of Contents