HP 10500 Series Configuration Manual page 230

Configuration procedure
In the server configuration, the client public key is required. Use the client software to generate the RSA
key pair on the client before configuring the Stelnet server.
The device supports a variety of Stelnet client software, such as PuTTY, and OpenSSH. The following is an
example of configuring Stelnet client using PuTTY Version 0.58.
1. Generate an RSA key pair on the Stelnet client:
a. Run PuTTYGen.exe, select SSH-2 RSA and click Generate.
Figure 82 Generating a key pair on the client
When the generator is generating the key pair, you must move the mouse continuously and
keep the mouse off the green progress bar shown in
stops moving and the key pair generating progress stops.
Figure
220
83. Otherwise, the progress bar