Ignoring Authorization Information From The Server; Displaying And Maintaining Port Security - HP 10500 Series Configuration Manual

Step
3. Configure a secure
MAC address.
4. Enter Layer 2 Ethernet
port view.
5. Enable inactivity
aging.
6. Enable the dynamic
secure MAC function.

Ignoring authorization information from the server

You can configure a port to ignore the authorization information received from the server (an RADIUS
server or the local device) after an 802.1X user or MAC authentication user passes authentication.
To configure a port to ignore authorization information from the server:
Step
1. Enter system view.
2. Enter interface view.
3. Ignore the authorization
information received from the
authentication server.

Displaying and maintaining port security

Task
Display port security configuration
information, operation
information, and statistics about
one or more ports or all ports.
Command
•
Approach 1 (in system view):
port-security mac-address security
[sticky] mac-address interface
interface-type interface-number vlan
vlan-id
•
Approach 2 (in interface view):
a. interface interface-type
interface-number
b. port-security mac-address
security [ sticky ] mac-address
vlan vlan-id
c. quit
interface interface-type interface-number
port-security mac-address aging-type
inactivity
port-security mac-address dynamic
Command
system-view
interface interface-type
interface-number
port-security authorization ignore
Command
display port-security [ interface interface-list ] [ |
{ begin | exclude | include } regular-expression ]
175
Remarks
Use either approach.
No secure MAC address exists by
default.
N/A
Optional.
By default, the inactivity aging
function is disabled.
Optional.
By default, sticky MAC addresses
can be saved to the configuration
file, and once saved, can survive a
device reboot.
Remarks
N/A
N/A
By default, a port uses the
authorization information received
from the authentication server.
Remarks
Available in any
view.