Perform MAC authentication on port GigabitEthernet 1/0/1 to control Internet access. Make sure the
following requirements are met:
The device detects whether a user has gone offline every 180 seconds. If a user fails authentication,
•
the device does not authenticate the user within 180 seconds.
All MAC authentication users belong to ISP domain 2000 and share the user account aaa with
•
password 123456.
Figure 47 Network diagram
Configuration procedure
1.
Make sure the RADIUS server and the access device can reach each other.
2.
Create a shared account for MAC authentication users on the RADIUS server, and set the
username aaa and password 123456 for the account.
3.
Configure the device:
# Configure a RADIUS scheme.
<Device> system-view
[Device] radius scheme 2000
[Device-radius-2000] primary authentication 10.1.1.1 1812
[Device-radius-2000] primary accounting 10.1.1.2 1813
[Device-radius-2000] key authentication abc
[Device-radius-2000] key accounting abc
[Device-radius-2000] user-name-format without-domain
[Device-radius-2000] quit
# Apply the RADIUS scheme to ISP domain 2000 for authentication, authorization, and
accounting.
[Device] domain 2000
[Device-isp-2000] authentication default radius-scheme 2000
[Device-isp-2000] authorization default radius-scheme 2000
[Device-isp-2000] accounting default radius-scheme 2000
[Device-isp-2000] quit
# Enable MAC authentication globally.
[Device] mac-authentication
# Enable MAC authentication on port GigabitEthernet 1/0/1.
[Device] mac-authentication interface gigabitethernet 1/0/1
# Specify the ISP domain for MAC authentication.
[Device] mac-authentication domain 2000
120