HP 10500 Series Configuration Manual page 190

# Add five OUI values.
[Device] port-security oui 1234-0100-1111 index 1
[Device] port-security oui 1234-0200-1111 index 2
[Device] port-security oui 1234-0300-1111 index 3
[Device] port-security oui 1234-0400-1111 index 4
[Device] port-security oui 1234-0500-1111 index 5
[Device] interface gigabitethernet 1/0/1
# Set the port security mode to userLoginWithOUI.
[Device-GigabitEthernet1/0/1] port-security port-mode userlogin-withoui
Verifying the configuration
# Display the RADIUS scheme radsun.
<Device> display radius scheme radsun
SchemeName
Index : 1
Primary Auth Server:
IP: 192.168.1.2
Encryption Key : N/A
VPN instance
Probe username : N/A
Probe interval : N/A
Primary Acct Server:
IP: 192.168.1.3
Encryption Key : N/A
VPN instance
Probe username : N/A
Probe interval : N/A
Second Auth Server:
IP: 192.168.1.3
Encryption Key : N/A
VPN instance
Second Acct Server:
IP: 192.168.1.2
Encryption Key : N/A
VPN instance
Auth Server Encryption Key : ******
Acct Server Encryption Key : ******
Accounting-On packet disable, send times : 5 , interval : 3s
Interval for timeout(second)
Retransmission times for timeout
Interval for realtime accounting(minute)
Retransmission times of realtime-accounting packet
Retransmission times of stop-accounting packet
Quiet-interval(min)
Username format
Data flow unit
Packet unit
: radsun
: N/A
: N/A
: N/A
: N/A
Type : standard
Port: 1812
Port: 1813
Port: 1812
Port: 1813
180
State: active
State: active
State: active
State: active
: 5
: 5
: 15
: 5
: 500
: 5
: without-domain
: Byte
: one