Adjusting The Trim Sensor Cam (Et) - Yamaha E115A Service Manual

BRKT

Adjusting the trim sensor cam (ET)

1. Fully retract the PTT unit.
2. Connect the test harness to the trim sen-
sor coupler.
O
B
B
Gy
P
P
DCV
1
R
Test harness 1:
90890-06878
Digital circuit tester:
90890-03174
3. Turn the engine start switch to ON.
4. Measure the trim sensor voltage.
Trim sensor voltage:
Pink (P)–Black (B)
0.03–0.11 V
7-33
Bracket unit
G 61U70580
5. If the trim sensor voltage is out of specifi-
cation, adjust the trim sensor cam 2 until
the specified trim sensor setting voltage
is obtained.
2
61U70590
61U5H11