Disassembling The Lower Case; Checking The Pinion And Forward Gear; Checking The Bearing; Checking The Drive Shaft - Yamaha E115A Service Manual

2. Remove the needle bearing from the for-
ward gear using a chisel.
cC
Do not reuse the bearing, always replace
it with a new one.

Disassembling the lower case

1. Remove the needle bearing.
2
1
Ball bearing attachment 1:
90890-06636
Driver rod LL 2: 90890-06605
61U5H11
6G460100
2
1
S6P26090E
Drive shaft and lower case
2. Remove the taper roller bearing outer
race and shim(s).
a
Bearing outer race puller
assembly 3: 90890-06523
NOTE:
Install the claws a as shown.
Checking the pinion and forward
gear
1. Check the teeth of the pinion, and the
teeth and dogs of the forward gear.
Replace if cracked or worn.

Checking the bearing

1. Check the bearing. Replace if pitted or if
there is rumbling.

Checking the drive shaft

1. Check the drive shaft. Replace if bent or
worn.
2. Measure the drive shaft runout.
Runout limit: 0.2 mm (0.008 in)
1
3
2
61U60030
3
4
5
6
7
8
9
S6P26210
6-14