Siemens SINUMERIK 810D Configuration Manual page 87

12.95
Table 5-1
Installation
1. Insert the ribbon cable for the X301 connector through the slot on the front
2. If applicable, attach the ribbon cable for connector X302 in the same way
Fig. 5-3
3. Once you have inserted the axis expansion plug-in unit and connected it to
E Siemens AG, 2002. All rights reserved
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
Ribbon cable connection for the axis expansion plug-in unit
Ribbon cable connector 1-axis power section
X301
X302
panel with the notch facing forward and plug it in.
(for the 2nd axis).
X302
X301
Ribbon cable
Installing the axis expansion ribbon cable
the CCU, push the excess length of cable into the space provided under the
metal cover of the axis expansion plug-in unit.
5 Axis Expansion
5.1 Axis expansion plug-in unit
2-axis power section
1st axis
unassigned
Front panel
Notch
301 302
Metal cover Axis expansion plug-in unit
1st axis
2nd axis
5-85