System Overview; Sinumerik 810D Powerline - Siemens SINUMERIK 810D Configuration Manual

System Overview

1.1

SINUMERIK 810D powerline

As from 03.2002
S
S
are ready for delivery. The following powerline modules are now available with
enhanced performance:
Table 1-1
Module
CCU3
Note
The SINUMERIK 810D powerline and SINUMERIK 810DE powerline are
supplied with SW 6.
Earlier system software versions of the SINUMERIK 810D cannot be used on
the
SINUMERIK 810D powerline or SINUMERIK 810DE powerline.
E Siemens AG, 2002. All rights reserved
SINUMERIK 810D Manual Hardware Configuration (PHC) - - 11.02 Edition
SINUMERIK 810D powerline and
SINUMERIK 810DE powerline
powerline modules for SINUMERIK 810D/810DE
Description
with additional pulse interface and two machining channels
1
1-13