Siemens SINUMERIK 810D Configuration Manual page 6

R
SINUMERIK Documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" columns.
Status code in the "Remarks" column:
A . . . . . New documentation.
B . . . . . Unrevised reprint with new order no.
C . . . . . Revised edition with new status.
If factual changes have been made on the page within the same
software version, this is indicated by a new edition coding in the
header on that page.
Edition Order No.
12.95 6FC5 297-1AD10-0BP0
07.96 6FC5 297-1AD10-0BP1
08.97 6FC5 297-2AD10-0BP0
12.98 6FC5 297-3AD10-0BP0
08.99 6FC5 297-3AD10-0BP1
04.00 6FC5 297-3AD10-0BP2
10.00 6FC5 297-4AD10-0BP0
12.01 6FC5 297-4AD10-0BP1
03.02 6FC5 297-6AD10-0BP0
11.02 6FC5 297-6AD10-0BP1
This manual is included in the documentation available on CD--ROM (DOCONCD)
Edition Order No.
11.02 6FC5 298-6CA00-0BG3
Trademarks
SIMATICr, SIMATIC HMIr, SIMATIC NETr, SIROTECr, SINUMERIKr and SIMODRIVEr are registered
trademarks of Siemens AG. Other product names used in this documentation may be trademarks which, if
used by third parties, could infringe the rights of their owners.
Further information is available on the Internet under:
http://www.ad.siemens.de/sinumerik
This publication was produced with Interleaf V7.
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority. Offenders
will be liable for damages. All rights, including rights created by patent
grant or registration of a utility model or design, are reserved.
E Siemens AG, 1995- -2002. All rights reserved
Order No. 6FC5 297-6AD10-0BP1
Printed in Germany
Remarks
A
C
C
C
C
C
C
C
C
C
Remarks
C
Other functions not described in this documentation might be
executable in the control. However, no claim can be made regarding
the availability of these functions when the equipment is first supplied
or for service cases.
We have checked that the contents of this document correspond to
the hardware and software described. Nonetheless, differences might
exist. The information contained in this document is, however,
reviewed regularly and any necessary changes will be included in the
next edition. We welcome suggestions for improvement.
Subject to change without prior notice
Siemens Aktiengesellschaft