Mitsubishi Electric GOT2000 Series Connection Manual page 388

■2. Printer setting
Step 1.
Select [Common]
Step 2.
Select the printer type.
Step 3.
Set the interface to which the printer is connected.
Step 4.
When Serial is selected in Printer type, clicking the detail setting button displays the Communication Detail
Settings dialog box for the communication driver. Make the settings according to the usage environment.
➠
Click the [OK] button when settings are completed.
16 - 6
16.4 GOT Side Settings
2.
[Peripheral Setting]
16.4.2 Communication detail settings
POINT POINT POINT
(1) Setting the communication interface
When Channel No.8 is used for the serial printer, the following external devices, which use
Channel No.8, cannot be connected at the same time.
• Barcode reader that requires the power supply
When connecting the above-mentioned devices at the same time, set the serial printer to
Channels No. 5 to 7.
(2) Setting for the driver
Regardless of the printer type, multiple printers are cannot be set.
Click!
3.
[Printer] from the menu.
4.