Communication Detail Settings - Mitsubishi Electric GOT2000 Series Connection Manual

11.4.2

Communication detail settings

Make the settings according to the usage environment.
Item
Transmission Speed
Data Bit
Stop Bit
Parity
POINT POINT POINT
(1) Communication interface setting by the Utility
(2) Precedence in communication settings
Description
Set this item when change the transmission speed used for communication
with the connected equipment.
(Default: 9600bps)
Set this item when change the data length used for communication with the
connected equipment.
(Default: 8bits)
Specify the stop bit length for communications.
(Default: 1bit)
Specify whether or not to perform a parity check, and how it is performed
during communication.
(Default: Even)
The communication interface setting can be changed on the Utility's [Communication setting]
after writing [Controller Setting] of project data.
For details on the Utility, refer to the following manual.
➠
GOT2000 Series User's Manual (Utility)
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
Range
4800bps, 9600bps, 19200bps,
38400bps, 57600bps, 115200bps
7bits/8bits
1bit/2bits
None
Even
Odd
11.4 GOT Side Settings
11
11 - 7