Communication Detail Settings - Mitsubishi Electric GOT2000 Series Connection Manual

7.4.2

Communication detail settings

Make the settings according to the usage environment.
Item
*1
Station No.
*2
Format
*1
*2
7 - 6
7.4 GOT Side Settings
Set the station No.
(Default: 1)
Set the following format.
Format 1: Big endian
Format 2: Little endian
(Default: 1)
Align the setting with the station No. of the slave equipment set on the master equipment side.
Align the setting with the specification of the PROFIBUS DP master equipment.
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be changed on the Utility's [Communication setting]
after writing [Controller Setting] of project data.
For details on the Utility, refer to the following manual.
➠ GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
Description Range
1 to 125
1, 2