Connection Diagram; Precautions - Mitsubishi Electric GOT2000 Series Connection Manual

5.3

Connection Diagram

The following diagram shows the connection between the GOT and the PLC.
5.3.1 RS-232 cable
■1. Connection diagram
(1) RS-232 connection diagram 1)
*1 Some MODBUS
Make sure to connect the cables and wires as described in the MODBUS
(2) RS-232 connection diagram 2)
*1 Some MODBUS
Make sure to connect the cables and wires as described in the MODBUS
■2. Precautions when preparing a cable
(1) Cable length
The length of the RS-232 cable must be 15m or less.
(2) GOT side connector
For the GOT side connector, refer to the following.
➠
1.4.1 GOT connector specifications
(3) MODBUS equipment side connector
Use the connector compatible with the MODBUS
For details, refer to the MODBUS
GOT side
1
CD
RD(RXD) 2
3
SD(TXD)
4
ER(DTR)
SG 5
6
DR(DSR)
7
RS(RTS)
CS(CTS) 8
9
NC
®
/RTU equipment require the control line (CS, RS, etc.) to be controlled.
GOT side
SD
RD
ER
DR
SG
RS
CS
®
/RTU equipment require the control line (CS, RS, etc.) to be controlled.
®
/RTU equipment side module.
®
/RTU equipment user's manual.
*1
MODBUS equipment side
-
TxD
RxD
-
SG
-
-
-
-
®
/RTU equipment manual.
*1
MODBUS equipment side
RxD
TxD
-
-
SG
-
-
®
/RTU equipment manual.
5.3 Connection Diagram
5
5 - 5