Mitsubishi Electric GOT2000 Series Connection Manual page 371

14.3.2 Setting communication interface (Controller Setting)
■1. When using the Ethernet connection cable
®
For using the VNC server, Ethernet
communication drivers must be set on the GOT,
and set the Communication settings
Step 1.
Select [Common]
Step 2.
The Controller Setting window is displayed. Select the channel to be used from the list menu.
Step 3.
Set Manufacturer, Controller Type, I/F, and Driver according to the connected equipment to be used.
Step 4.
The detailed setting is displayed after Manufacturer, Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
Click the [OK] button when settings are completed.
2.
[Controller Setting] from the menu.
3.
4.
Click!
14.3 GOT Side Settings
14
14 - 5