Flowchart; Flowchart For Connection And Settings - Mitsubishi Electric DX-TL2500E Installation And Operation Manual

Flowchart

Flowchart for connection and settings

Installation example :
This is an example operational flowchart of the following : making connections at the rear of the terminal ; setting
HDD mode to PARTITION ; making default settings ; making an Alarm recording with Timer mode ; searching
recorded data with ALARM LIST SEARCH ; using playback, and copying to a Compact Flash Card.
Connection to the terminals on the back
• Connection to the terminals on the back.
See " Connecting to CCTV camera, monitor,
sensor", page 15.
• Connection to the alarm recording.
See " Alarm Recording Connection", page
16 and " Rear View" , pages 13, 14.
The unit is booted
AUTO SET UP
• Setting the auto set up.
See " AUTO SET UP", pages 17, 18.
Only when the unit is turned on for the first time, the
<AUTO SET UP> screen is displayed automatically. It is not
automatically displayed after next time.
Selecting the "YES" in "PERFORM AUTO SET
UP?" setting.
Recording
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
8
Connection to the terminals on the back
• Connection to the terminals on the back.
See " Connecting to CCTV camera, monitor,
sensor", page 15.
• Connection to the alarm recording.
See " Alarm Recording Connection", page
16 and " Rear View" , pages 13, 14.
The unit is booted
AUTO SET UP
• Setting the auto set up.
See " AUTO SET UP", pages 17, 18.
Only when the unit is turned on for the first time, the
<AUTO SET UP> screen is displayed automatically. It is not
automatically displayed after next time.
Selecting the "NO" in "PERFORM AUTO SET
UP?" setting.
Making the HDD REC SETTING
• Setting the PARTITION. " PARTITION/PARTITION SIZE"
default settings "NORMAL" } } } } } "PARTITION".
See " PARTITION/PARTITION SIZE", page 79.
Changing the initial menu settings
• Setting the language.
See " LANGUAGE SELECTION", page 26.
• Setting the present time and screen display.
See "<TIME DATE/DISPLAY SETTINGS>",
pages 33-35.
• Setting the present time.
See " TIME DATE ADJUST", pages
21, 22.
• Setting the display mode.
See " DISPLAY MODE", page 33.
• Setting the audio recording.
See " AUDIO RECORDING", pages 51, 52
and " Continuous recording time table", pages
88, 89.
Setting the HDD (hard disk drive) mode
• Setting the repeat recording.
See " HDD REPEAT REC MAIN/HDD
REPEAT REC SUB/HDD REPEAT REC LPA",
page 49.
• Setting the remain HDD capacity.
See " REMAIN HDD", page 53.
• Setting the call out.
See "• HDD MAIN REMAIN/HDD SUB
REMAIN/HDD LPA REMAIN/ARCHIVE REMAIN",
pages 53, 54 and "• HDD MAIN FULL/HDD SUB
FULL/ HDD LPA FULL/ ARCHIVE FULL", page
54.