Starting Cbtp From The Management Module - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

Starting CBTP from the management module

CBTP is a CD-boot program. CBTP can be started from a CD drive directly
connected to a server blade, or from the ISO image using the remote console
virtual media feature.
CBTP can be also started from the ISO image in the flash memory embedded
in a server chassis. You need to copy the ISO image on the flash memory
embedded in the server chassis beforehand. Connect to the management
module via FTP and transfer the ISO file to copy it. Then, mount the ISO
image on the server blade using the management module Web console,
power on the server blade to execute CD-boot for starting CBTP.
Tip: The mounted ISO image is automatically unmounted when the server
blade is powered off.
Showing CBTP ISO image stored in the flash
memory embedded in the server chassis
Mount and Unmount the ISO image on the
server blade
The following flow chart shows the procedure for how to start CBTP from the
ISO image stored in the flash memory embedded in the server chassis.
2-304
Hitachi Compute Blade 500 Series Management Module Setup Guide
Table 2-170 Web console operation
Item
Functional detail
Operation
Resources > Systems > CBTP >
ISO image tab
Resources > Systems > CBTP >
CBTP tab