Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 56

Therefore, In the initial settings (the settings at shipping time), SSL 3.0 is disabled.
SSL 3.0 has a communication vulnerability and part of the communications might be
readable by third parties. Therefore, we recommend that you disable SSL 3.0 if it is
not required for use. For details about settings, see
page 2-36
Note: When Security strength is set to high or when Security strength is set
to default and communication is enabled only with TLS 1.2, connection with
HCSM not supporting TLS 1.2 is not available. See HCSM instruction manuals
for the operation.
BMC
Server blade Web
console
IPMI over LAN
Remote console
SMASH (CLP)
SMASH (WS-
Management)
Syslog transfer
LDAP authentication
Notes:
1 The port is isolated for CB 520H B2 server blade with firmware version 04-22 or
.
later. For CB 520H A1/B1/B2,CB 520A A1, CB 540A A1/B1 server blade with
firmware version 04-21 or earlier, HTTP is used for a part of communication
2 Connection is rejected at IPMI v1.5 LAN Session Startup.
.
3 Connection is available only when CipherSuite ID is 3 and both Username and
.
Password are not blank.
4 SSL 3.0 is not available for CB 520X B1/B2 and CB 520H B3 because they do not
.
support SSL 3.0.
2-32
Hitachi Compute Blade 500 Series Management Module Setup Guide
Feature
Feature Protocol
HTTP
HTTPS
IPMI v1.5
IPMI v2.0
Hitachi protocol
SSHv2
WS-MAN
SYSLOG
LDAP (StartTLS)
Functional detail
Protocol
Default
TLS/SSL version settings on
Security strength
Default
1
Not available
Available
(SSL3.0,
TLS1.0/1.1/1.2)
Available
Available
Available
(SSL3.0,
TLS1.0/1.1/1.2)
Available
Available (TLS 1.0)
Available
Available
(TLS 1.0/1.1/1.2)
Security strength
high
high
Not available
Available
(TLS 1.2)
4
Not available
3
Available
Available (TLS
1.2)
4
Available
Available (TLS
1.0)
Available
Available
(TLS 1.2)
1
2