Requirement; Configuring Snmp - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

The following table shows the specification of SNMPv3.
Authentication (Hash method)
Encryption

Requirement

• SNMP manager that receives SNMP trap must support SNMPv1/v2c/v3.
• The network communication must be available between the management
module and the SNMP manager on management server.

Configuring SNMP

The following procedure indicates the configuration steps to use SNMP on the
management module.
Exporting MIB file
You can export the MIB file to manage the system unit from the management
module console.
When the firmware for management module is updated and new OID is
added, export the MIB after the update. The MIB version to be exported is
also confirmed from the management module console.
Exporting MIB
Displaying MIB version Administration tab > SNMP > MIB tab
Hitachi Compute Blade 500 Series Management Module Setup Guide
Table 2-121 Specification of SNMPv3
Item
Table 2-122 Web console operation
Item
Administration tab > SNMP > MIB tab > Download MIB file
button
Functional detail
Specification
MD5/SHA-1
DES/AES128
Operation
2-235