Backing Up And Restoring Settings; Possible To Save And Restore Configuration - Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual

(4) Checking the new version
This subsection describes how to check that the latest version, which was
obtained in
2-294, has been properly applied.
1 Click Resources tab > Systems > Firmware.
.
2 Total version on Server Blade tab shows the current firmware version.
.
Check that all updated server blades show the latest updated firmware
version.

Backing up and restoring settings

This section describes backing up and restoring settings executed by
management modules.

Possible to save and restore configuration

The following backing up and restoring settings are available from the
management module.
Management module settings
Fibre Channel mezzanine card settings
2-300
Hitachi Compute Blade 500 Series Management Module Setup Guide
(1) Obtaining the latest version of Server blade firmware on page
Table 2-164 Backing up and restoring setting
Item
Functional detail
Available operation
Backing up and restoring
Backing up