Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 260

Exporting MIB
Displaying MIB version
Setting SNMP manager
Perform the following procedure to the SNMP manager. For details about
setting SNMP manager, see the SNMP manager documents.
• Registering MIB file
• Registering trap event
• Selecting MIB information items and setting the required parameter to get
the information by polling.
For details about the content of trap event and collectable MIB information
items, see the Hitachi Compute Blade 500 Series MIB User's Guide.
Setting management module
Perform the following settings to the management module. The agent
settings are relating to the management module information and the
manager settings are relating to the SNMP manager. For details about setting
items, see the Hitachi Compute Blade 500 Series Web Console User's Guide.
• Agent settings
Seven items of Agent settings are shown below.
¢
¢
¢
¢
¢
¢
• Manager settings
Ten items of Manager settings are shown below.
¢
¢
¢
¢
¢
¢
¢
¢
2-236
Hitachi Compute Blade 500 Series Management Module Setup Guide
Table 2-123 CLI console command
Item
Enabling/disabling SNMP
System Contact Name
Port number
Trap level
SNMP version
Character string for creating engine ID
IP address/host name
Port number
SNMP version
Community name
User name
Access type
Authentication type
Authentication password
Functional detail
Command
export snmp mib
show snmp mib