Hitachi COMPUTE BLADE 500 SERIES Management Module Setup Manual page 126

¢
• Directory search settings
¢
¢
¢
• Group authentication settings.
¢
¢
Displaying/setting LDAP server settings
For details about Resources > Server blade > BMC tab > LDAP items, see
the Hitachi Compute Blade 500 Series Web Console User's Guide.
Management module settings
This section describes settings for connecting management modules to LDAP
servers.
• LDAP server linkage setting
LDAP server linkage can be selected enable/disable.
The factory default setting is disabled.
When LDAP server linkage setting is enabled, the management module
searches the LDAP directory on the LDAP server at user authentication.
• Authentication method
For detail about the authentication method with LDAP linkage, see
Overview.
• LDAP servers registration
The maximum of three LDAP servers can be registered. LDAP servers can
be specified by using either their IP addresses or host names.
• LDAP server connection setting
2-102
Hitachi Compute Blade 500 Series Management Module Setup Guide
Anonymous Bind/Bind DN/Bind password
Specify a DN and password used for bind to LDAP server. You must
set them according to the settings you specified in
Setting on page 2-91.
Base DN: Specify a DN used as root of directory search.
Login ID attribute: Specify an attribute of user entry used as login ID.
If empty string is specified, sAMAccountName is used.
Role attribute: Specify an attribute of user entry used for granting the
role in Granting Role Information on page
specified, BMC considers that users have no role.
Authentication method: Select "Static group" to perform group
authentication.
Group DN1/Group DN2/Group DN3/Group DN4/Group DN5
Specify a DN of group entry. When Authentication method is "Static
group", the server blade BMC only allows the group members to log in
to BMC.
Table 2-95 Web console operation
Item
Functional detail
2-97. If an empty string is
Description
Server Blade x > BMC tab > Edit > LDAP
Active Directory