Figure 4.15 Program Execution - Samsung OFFICESERV 7100 Service Manual

CHAPTER 14. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.
7) Start the Chain file and click the [GO] button on the following window, and then the
program is executed. When performing CPLD programming, the multimedia card
should be removed by all means.
If programming is normally completed, the following message appears and then, if
clicking the [OK] button, all the operations are completed.
When the operation finishes normally:
Overwrite?
Message in case of normal status
Device Being Processed(mach***)
Programming Row
Reading Row
No Errors
Continue
JTAG Processing Complete
Message in case of abnormal status
+5VDC to CPLD is low.
The programming cable is not in the directory
C:WVANTISWMACHPROWyourfilename.JED
Your CPLD chip is not installed properly into the chip socket.
You found a new way to mess up.
4-14

Figure 4.15 Program Execution

OK
60-0
60-0
OK
© SAMSUNG Electronics Co., Ltd.