Quick Setup - ABB i-bus KNX Product Manual

®

i-bus KNX

2 Quick Setup

1. Import the Product ABB KNX/EnOcean Gateway EG/A 32.2.1 in the ETS.
2. Add the Gateway to your ETS Project.
3. Connect the Gateway to the KNX Bus.
4. Program with the ETS the physical address and the empty Application program, of the
Gateway.
Thereby the file of the available EnOcean devices (*.ike) will be loaded into the gateway,
Details see section 4
5. Open the gateway parameters in the ETS.
Click the button "Add Device Node".
6.
In the following window, click on the button "Discover Device".
7.
a) Wait until the progress bar „Discovering devices (press Teach button)" appears at the
left bottom of the window.
b) Push the Teach button on the EnOcean Device you want to connect.
The Progress bar disappears and the appropriate device data fades in.
c) By pushing the button „Add Device Node" the device gets integrated.
For every following EnOcean device repeat steps 5 and 6.
With this approach for setup only the standard communication objects will be
visible/active in the ETS. If you need other communication objects or want to modify the
standard communication objects you can do this with the ETS plugin. For details see
section 5.
8. In the ETS you can now connect the communication objects of the EnOcean devices to
your group addresses.
9. Download the application program to the Gateway.
10. Place the EnOcean devices at their destination point and test their functionality (signal
strength)
You can use the i-bus Tool (www.abb.com/knx) for testing of the function and the signal
strength.
Recommendation:
With a radius of 5m around the gateway the EnOcean devices should be certainly
discovered.
At a signal strength < -80 dBm (< 30% signal strength) you have to connect the device to
an additional gateway.
ABB STOTZ-KONTAKT GmbH
Eppelheimer Straße 82, 69123 Heidelberg, Germany
 +49 (0) 6221 701 607
 +49 (0) 6221 701 724
EG/A 32.2.1
www.abb.com/knx
Technische Helpline / Technical Support
 +49 (0) 6221 701 434 E-Mail: knx.helpline@de.abb.com
User's manual r1.5 eng
6 / 47