Add A New Catalogue - ABB i-bus KNX Product Manual

 ®
i-bus KNX
The greyed communication objects are disabled. To enable these objects just click on them with
the mouse right-button and select Enable. To disable them, repeat the same process but
selecting Disable.
To check the datapoint type (DPT) and the functionality for each communication object simply
point the mouse over the desired object and this information will appear. This is very useful in
order to know which value sent from KNX enables the desired feature associated to the
communication object. A summary of this information can be found on the section 8 of this
document.
In some cases, when grouping is active for instance, enabling and disabling communication
objects from the device tree is not allowed. Therefore, if you are trying to disable/enable a
communication object from a rocker button, make sure that you use the General settings
section to do it and not right clicking on the device tree directly.

5.1.5 Add a new catalogue

Our catalogues include all available EnOcean devices that can be integrated into KNX through
our gateway. When new products are included in the catalogue this file has to be updated to
configure the gateway using these new products.
To do it so, please download the latest version of the catalogue through our web site. Then click
on the Import Catalogue button and select the location of the file that has to be imported (see
Figure 5.11 for more details).
ABB STOTZ-KONTAKT GmbH
Eppelheimer Straße 82, 69123 Heidelberg, Germany
 +49 (0) 6221 701 607
EG/A 32.2.1
Figure 5.9 Enable Disable EnOcean devices
Figure 5.10 Communication object DPT information
 +49 (0) 6221 701 724
www.abb.com/knx
Technische Helpline / Technical Support
 +49 (0) 6221 701 434 E-Mail: knx.helpline@de.abb.com
User's manual r1.5 eng
21 / 47