Enable And Disable Communication Objects - ABB i-bus KNX Product Manual

®

i-bus KNX
Dimming increase step
value (on long pulse):
Dimming decrease step
value (on long pulse)
Dimming periodic step
value sending (on long
pulse)
Shutter/Blind operation
Shutter/Blind method
Shutter/Blind vanes
adjustment time
Shutter/Blind operation (top
button / bottom button)
Send temperature
Send value
B. Simulated devices
Device Parameter
General
KNX periodic output update
Room
Minimum/Maximum
Operating
temperature setpoint
Panel
On button
Off button
Increase button
Rocker
Decrease button
Switch
Min. to max. intensity time
Up button
Down button

5.1.4 Enable and disable communication objects

Once we have one or several EnOcean devices, these and their communication objects will
appear in the plugin tree-view (expand the devices in order to see the communication objects or
click on Expand button).
ABB STOTZ-KONTAKT GmbH
Eppelheimer Straße 82, 69123 Heidelberg, Germany
 +49 (0) 6221 701 607
 +49 (0) 6221 701 724
EG/A 32.2.1
Defines the step value for the increase step when dimming
mode is selected and long pulse is carried out.
Defines the step value for the decrease step when dimming
mode is selected and long pulse is carried out.
Defines the amount of time that it takes to move from one step
to the next one when the button is constantly pressed. This
parameter will help in achieving a smoother dimming effect if
combined with small step values.
Functionality of the button when pressed.
(Up, Down or Toggle)
Functionality of the button when pressed.
(Move-Step or Step-Move-Step)
Defines the amount of time that it takes to move from one
position to the next one.
Functionality of the button when pressed.
(UP-Down or Down-UP)
Writes a KNX temperature value.
(Expressed in ºC, range may vary depending on each device)
Writes a KNX value.
(values from 0 to 255)
Description
Indicates the period (in seconds) that the existing values will
be sent to KNX cyclically.
(0= disabled; values from 10 to 2550, multiple of 10).
Indicates the maximum and minimum setpoint temperature
desired in the project.
(Expressed in ºC, range may vary depending on each device)
Functionality of the button when pressed.
(On message is simulated)
Functionality of the button when pressed.
(Off message is simulated)
Functionality of the button when pressed.
(Increase message is simulated)
Functionality of the button when pressed.
(Decrease message is simulated)
Indicates the time elapsed , expressed in ms, between the
minimum and maximum intensity value
Functionality of the button when pressed.
(Up message is simulated)
Functionality of the button when pressed.
(Down message is simulated)
Figure 5.8 Plugin tree view
www.abb.com/knx
Technische Helpline / Technical Support
 +49 (0) 6221 701 434 E-Mail: knx.helpline@de.abb.com
User's manual r1.5 eng
20 / 47