E-Mail - ABB SM3000 User Manual

4.4.6 e-mail

The instrument can be configured to send e-mails to a maximum of 6 recipients in response to certain events. The addressees can
all subscribe to the same SMTP server or the instrument can be configured to send e-mails via 2 different SMTP servers to a maximum
of 3 addressees per server.
Up to 10, independantly configurable triggers can be enabled to generate an e-mail when the selected source becomes active.
When a trigger source becomes active, an internal 1 minute delay timer is started. At the end of that minute, an e-mail is generated
that includes, not only the event that intitiated the delay timer, but every other event that occurred during the delay period together
with any enabled reports. The data returned in the e-mail therefore reflects the real-time alarm state at the time the e-mail was
generated, the state when the first trigger source became active.
not
Each e-mail includes a link to the instrument's embedded web server enabling the instrument's data and status to be viewed remotely
using an internet browser on a PC – see Section 4.4.5 and APPENDIX 4.
e-mail Trigger Source
External Media Report
Channels Report
Totalizers Report
Link to Instrument's Web Server
Alarm Event Trigger Source
Link to Instrument's Web Server
Fig. 4.9 Reports e-mail Example
Fig. 4.10 Event Trigger e-mail Example
4 CONFIGURATION...
67