ABB SM3000 User Manual page 56

...4 CONFIGURATION
...4.3 Making Changes to Parameters – Figs. 4.4 to 4.7
Select the tab appropriate
to the data to be copied.
Press the key to open
the menu and use the
and keys to select
the copy facility.
Use the , , ,
and keys to select
copy destinations.
Note. The copy facility enables the settings from a feature configured previously to be copied to other, identical
features; e.g. from one analog input to another, one operator message to another, etc.
54
1
,
2
Source of copied data
3
Press the key to open the menu and use the
4
to copy the source settings to the selected destinations.
Press the key to open the menu and use the
5
to exit the copy facility.
Fig. 4.6 Copy Facility
, and keys
, and keys